Epson et-4760 Scanner Driver Download: Step-by-Step Complete Guide

Mills Stanley Updated by Mills Stanley

Epson et-4760 Scanner Driver Download

The Epson ET-4760 is a versatile all-in-one printer that features printing, scanning, copying, and faxing capabilities. To unlock the full potential of the scanner, you must download and install the correct driver. This guide will walk you through the process of downloading, installing, and configuring the scanner driver for the Epson ET-4760 on both Windows and macOS.

Step 1: Prepare Your System

Before starting, make sure your computer and printer meet the necessary system requirements for the scanner driver. Below are the minimum requirements for both Windows and macOS systems:

Windows System Requirements:
  • Operating System: Windows 7, 8, 8.1, 10 (32-bit or 64-bit)
  • Processor: 1 GHz or faster
  • RAM: 1 GB (32-bit) or 2 GB (64-bit)
  • Free hard disk space: At least 200 MB
macOS System Requirements:
  • Operating System: macOS 10.12.x or later
  • Processor: Intel Core 2 Duo or better
  • RAM: 2 GB or more
  • Free hard disk space: At least 300 MB

Once you verify that your system meets these requirements, proceed to the next step.

Step 2: Gather the Necessary Materials

To install the scanner driver, you’ll need the following:

  1. A stable internet connection.
  2. The Epson ET-4760 printer powered on and connected to your network or computer.
  3. A USB cable if you’re using a wired setup (optional for wireless users).

Step 3: Visit the Epson Support Website

To download the scanner driver, visit the official Epson Support page:

  1. Open your web browser and go to the Epson Support page.
  2. In the search bar, type Epson ET-4760 and hit Enter.
  3. Select your printer model from the search results.

This will direct you to the Epson ET-4760 product support page, where you’ll find various tabs, such as Drivers, Manuals, FAQs, and Videos.

Step 4: Navigate to the Drivers & Downloads Section

  1. On the product support page, click on the Drivers & Downloads tab.
  2. Ensure that the correct operating system is automatically detected by the website. If it isn’t, you can manually select your operating system from the dropdown menu.

Once your operating system is selected, a list of available drivers and utilities for your Epson ET-4760 will be displayed.

Step 5: Download the Scanner Driver

To download the scanner driver, follow these steps:

  1. Look for the Scanner Driver and Epson Scan Utility in the list of available software.
  2. Click the Download button next to it.
  3. The driver file will start downloading, and it will be saved in your Downloads folder.

If you also wish to download optional utilities such as the Epson Event Manager or firmware updates, you can do so from this same page.

Step 6: Install the Scanner Driver on Windows

Once the driver has been downloaded, you can proceed to install it on your Windows computer.

Installation Steps for Windows:
  1. Locate the Downloaded File:
    Open your Downloads folder and find the downloaded driver file, which will usually have an extension like .exe.
  2. Run the Installer:
    Double-click the file to run the installer. If prompted by Windows User Account Control, click Yes to allow the installer to make changes to your computer.
  3. Follow the On-Screen Instructions:
    The installation wizard will guide you through the process. Accept the license agreement and follow the steps as instructed.
  4. Select Connection Method:
    During installation, you will be asked whether you want to connect the printer via USB or Wi-Fi. Choose the method that applies to your setup.
    • For a USB connection, connect the printer to your computer using a USB cable.
    • For a Wi-Fi connection, make sure the printer is powered on and connected to the same Wi-Fi network as your computer.
  5. Complete the Installation:
    Once the installation is complete, restart your computer if prompted. Your scanner should now be ready for use.
Wireless Setup for Windows:

If you opted for a wireless setup, ensure that both your printer and computer are connected to the same Wi-Fi network. The software will automatically detect the printer during installation. If it doesn’t, manually enter the printer’s IP address.

Step 7: Install the Scanner Driver on macOS

The installation process on macOS is slightly different but equally straightforward.

Installation Steps for macOS:
  1. Locate the Downloaded File:
    Navigate to your Downloads folder and find the driver file, typically a .dmg file for macOS.
  2. Run the Installer:
    Double-click the .dmg file to open the installer package, and then double-click the installer icon to start the installation process.
  3. Follow the On-Screen Instructions:
    You will be guided through the installation process. Agree to the license agreement and choose your installation preferences.
  4. Select Connection Type:
    During installation, you will be prompted to select the connection method (USB or wireless).
    • If you’re using a USB connection, plug in the cable to connect your printer to the Mac.
    • If you’re using a Wi-Fi connection, make sure your printer and Mac are on the same Wi-Fi network.
  5. Complete the Installation:
    Once the installation finishes, you may be prompted to restart your Mac. After restarting, your scanner will be ready to use.
Wireless Setup for macOS:

If connecting wirelessly, select Wireless Setup during the installation process. Make sure the printer is turned on and connected to the same Wi-Fi network as your Mac.

Step 8: Test Your Scanner

After successfully installing the scanner driver, it’s essential to test the functionality of your Epson ET-4760 scanner to ensure everything works correctly.

For Windows:
  1. Open the Epson Scan utility from the Start menu or desktop.
  2. Place a document or photo on the scanner bed.
  3. Select your scan settings (color, resolution, etc.).
  4. Click Scan and save the file to your desired location.
For macOS:
  1. Open Image Capture (macOS’s built-in scanner software) from Applications.
  2. Select the Epson ET-4760 from the list of devices.
  3. Place your document or photo on the scanner bed.
  4. Adjust the scan settings as needed, then click Scan.

Step 9: Troubleshooting Common Issues

If you encounter any problems during installation or when using the scanner, consider the following troubleshooting tips:

  • Scanner Not Detected: Ensure your computer and printer are on the same Wi-Fi network (for wireless setups). If using USB, confirm that the cable is securely connected.
  • Driver Compatibility Issues: Verify that you’ve downloaded the correct scanner driver for your operating system. Double-check the OS version compatibility on Epson’s website.
  • Scanner Fails to Start: Restart both your computer and the printer. Ensure the scanner is not in sleep mode or offline.

Step 10: Updating and Uninstalling the Scanner Driver

Updating the Driver:

Epson frequently releases driver updates to improve performance and add new features. To update your scanner driver, periodically check the Epson support website for updates. Download the latest driver and repeat the installation process to update.

Uninstalling the Driver:
  • For Windows: Go to Control Panel > Programs and Features, find the Epson ET-4760 software, and select Uninstall.
  • For macOS: Navigate to Applications, locate the Epson Scan software, and drag it to the Trash.

Conclusion

Downloading and installing the Epson ET-4760 scanner driver is a straightforward process, whether you’re using Windows or macOS. By following this step-by-step guide, you can ensure that your printer’s scanner functions properly and efficiently. Once installed, the Epson ET-4760 will provide reliable scanning performance for all your documents and images.

FAQ for Epson ET-4760 Scanner Driver Download

1. Where can I download the Epson ET-4760 scanner driver?

You can download the scanner driver from the Epson Support page. Search for "Epson ET-4760" and navigate to the Drivers & Downloads section.

2. What operating systems are supported?

The Epson ET-4760 scanner driver supports Windows 7, 8, 8.1, 10 (32/64-bit) and macOS 10.12.x or later.

3. How do I install the scanner driver?

After downloading, open the installer file (.exe for Windows, .dmg for macOS), follow the installation wizard, and select your connection type (USB or Wi-Fi).

4. Can I set up the scanner wirelessly?

Yes, during installation, choose Wireless as your connection option and ensure your printer and computer are connected to the same Wi-Fi network.

5. Why is my scanner not detected after installation?

Ensure the printer is powered on, correctly connected (via USB or Wi-Fi), and that both the printer and computer are on the same network.

6. How do I update the scanner driver?

Check for updates on the Epson support website and download the latest version of the scanner driver. Install it by following the same steps as the initial setup.

7. What should I do if the installation fails?

Restart your computer, ensure all connections are secure, and check that your system meets the minimum requirements. If the issue persists, try downloading the driver again.

8. How do I uninstall the scanner driver?

For Windows, go to Control Panel > Programs and Features, locate the Epson scanner driver, and select Uninstall. On macOS, drag the Epson Scan software to the Trash.

9. Can I use the scanner without the driver?

No, the scanner driver is essential for your computer to communicate with the scanner. Without it, scanning functionality will not work.

10. How do I test if the scanner is working?

Open the Epson Scan Utility or Image Capture (on macOS), place a document on the scanner bed, adjust settings, and click Scan to ensure it functions properly.

How did we do?

Error 0xf4 on Epson L656: Common Causes and How to Resolve It

Download and Install Epson 4760 Printer Software: Complete Guide

Contact