Epson Printer et 2720 Not Connecting to Wi-Fi | Complete Guide

Mills Stanley Updated by Mills Stanley

Epson Printer ET-2720 Not Connecting to Wi-Fi

When your Epson ET-2720 printer is not connecting to Wi-Fi, it can be due to several reasons, such as network issues, incorrect settings, or printer malfunctions. This guide will walk you through troubleshooting steps to resolve connectivity issues and get your printer back online.

Introduction

The Epson ET-2720 is a versatile printer known for its ease of use and high-quality prints. However, connectivity issues can occasionally arise, disrupting your workflow. By systematically addressing potential problems, you can usually restore Wi-Fi connectivity.

Step-by-Step Troubleshooting Guide

Step 1: Preliminary Checks
  1. Check Power and Wi-Fi Status:
    • Ensure that the printer is powered on. The Wi-Fi indicator light should be flashing or steady, indicating an attempt to connect to the network.
    • Make sure your Wi-Fi router is powered on and functioning correctly. Verify that other devices can connect to the Wi-Fi network.
  2. Printer Location:
    • Place the printer within the range of your Wi-Fi router. Avoid obstructions and interference from other electronic devices.
  3. Restart Devices:
    • Restart both your printer and Wi-Fi router to reset the connections. Turn off the printer and unplug the router for about a minute, then turn them back on.
Step 2: Verify Wi-Fi Network Settings
  1. Correct Wi-Fi Network:
    • Ensure that your printer is trying to connect to the correct Wi-Fi network. If you have multiple networks, make sure the printer is configured to use the desired one.
  2. Wi-Fi Password:
    • Double-check the Wi-Fi password you are entering. Ensure there are no typographical errors and that you are using the correct case for each character.
Step 3: Reconnect Printer to Wi-Fi
  1. Using the Control Panel:
    • On the printer’s control panel, navigate to the Wi-Fi setup menu.
    • Select ‘Wi-Fi Setup Wizard’ or a similar option.
    • Choose your Wi-Fi network from the list and enter the password.
  2. Using WPS (Wi-Fi Protected Setup):
    • If your router supports WPS, press the WPS button on your router.
    • On your printer, navigate to the WPS setup option and follow the on-screen instructions to complete the connection.
Step 4: Update Printer Firmware
  1. Check for Firmware Updates:
    • Sometimes, firmware updates can resolve connectivity issues. Visit the Epson support website and check for any available firmware updates for the ET-2720.
    • Download and install the updates as per the provided instructions.
Step 5: Reset Network Settings on Printer
  1. Factory Reset Network Settings:
    • If the above steps don’t work, reset the network settings on your printer to factory defaults.
    • Navigate to the settings menu on the printer’s control panel.
    • Find the ‘Restore Default Settings’ option and select ‘Network Settings’.
    • After resetting, try reconnecting the printer to your Wi-Fi network using the steps mentioned above.
Step 6: Configure Static IP Address
  1. Assign Static IP:
    • Assigning a static IP address to your printer can help avoid conflicts and ensure a stable connection.
    • Access your router’s settings through a web browser (refer to your router’s manual for instructions).
    • Find the DHCP settings and reserve an IP address for your printer.
    • On your printer, navigate to the network settings and manually enter the static IP address, subnet mask, and gateway.
Step 7: Advanced Troubleshooting
  1. Check Router Settings:
    • Ensure your router’s firmware is up-to-date.
    • Disable MAC address filtering or add your printer’s MAC address to the allowed list.
    • Ensure the 2.4 GHz band is enabled on your dual-band router, as some printers do not support the 5 GHz band.
  2. Firewall and Security Software:
    • Temporarily disable any firewall or security software on your computer or router that might be blocking the printer’s connection.
Step 8: Contact Epson Support
  1. Professional Assistance:
    • If you have tried all the above steps and your Epson ET-2720 is still not connecting to Wi-Fi, it might be time to contact Epson support.
    • Visit the Epson support website or call their customer service for further assistance. Provide them with details of the issue and the steps you’ve already taken.

Conclusion

Wi-Fi connectivity issues with your Epson ET-2720 printer can be frustrating, but by following these systematic troubleshooting steps, you can often resolve the problem. Start with basic checks and gradually move to more advanced solutions if needed. Keeping your printer’s firmware updated and ensuring correct network settings can prevent many common connectivity issues. If all else fails, professional assistance from Epson support can help get your printer back online.

Frequently Asked Questions (FAQ) for Epson Printer ET-2720 Not Connecting to Wi-Fi

1. Why is my Epson ET-2720 not connecting to Wi-Fi?

Answer: There could be several reasons for your Epson ET-2720 not connecting to Wi-Fi, including incorrect Wi-Fi settings, network issues, or printer firmware problems. Follow the troubleshooting steps to diagnose and resolve the issue.

2. How do I connect my Epson ET-2720 to a Wi-Fi network?

Answer: To connect your Epson ET-2720 to a Wi-Fi network:

  1. Turn on the printer.
  2. Access the Wi-Fi setup menu from the printer’s control panel.
  3. Select ‘Wi-Fi Setup Wizard’ and choose your Wi-Fi network from the list.
  4. Enter your Wi-Fi password when prompted.
3. What should I do if my Epson ET-2720 cannot find my Wi-Fi network?

Answer: If your printer cannot find your Wi-Fi network:

  1. Ensure the printer is within range of your Wi-Fi router.
  2. Restart your Wi-Fi router and printer.
  3. Verify that the Wi-Fi network is not hidden.
  4. Check if other devices can connect to the Wi-Fi network.
4. Why does my Epson ET-2720 keep disconnecting from Wi-Fi?

Answer: Frequent disconnections can be caused by weak signal strength, interference from other devices, or router settings. Try placing the printer closer to the router, reducing interference, and checking your router’s firmware for updates.

5. How do I reset the network settings on my Epson ET-2720?

Answer: To reset the network settings:

  1. Navigate to the settings menu on the printer’s control panel.
  2. Select ‘Restore Default Settings’.
  3. Choose ‘Network Settings’ to reset them to factory defaults.
  4. Reconnect the printer to your Wi-Fi network.
6. How do I assign a static IP address to my Epson ET-2720?

Answer: Assigning a static IP address can help with connectivity:

  1. Access your router’s settings through a web browser.
  2. Reserve an IP address for your printer under DHCP settings.
  3. On the printer, go to network settings and enter the static IP address, subnet mask, and gateway manually.
7. What should I do if my Epson ET-2720 is showing as offline?

Answer: If your printer is offline:

  1. Ensure the printer is powered on and connected to Wi-Fi.
  2. Check the printer’s status in the devices and printers section on your computer.
  3. Restart your printer and Wi-Fi router.
  4. Reconnect the printer to the Wi-Fi network.
8. How do I update the firmware on my Epson ET-2720?

Answer: To update the printer firmware:

  1. Visit the Epson support website.
  2. Search for your printer model and download the latest firmware update.
  3. Follow the provided instructions to install the update on your printer.
9. Can I connect my Epson ET-2720 using WPS (Wi-Fi Protected Setup)?

Answer: Yes, to connect using WPS:

  1. Press the WPS button on your Wi-Fi router.
  2. On the printer’s control panel, navigate to the WPS setup option.
  3. Follow the on-screen instructions to complete the connection.
10. How can I check my Epson ET-2720’s IP address?

Answer: To check the printer’s IP address:

  1. Print a network status sheet from the printer’s settings menu.
  2. The IP address will be listed on the status sheet.
11. Why is my Epson ET-2720 not connecting after a router change?

Answer: If you’ve changed your router, the printer needs to be reconnected to the new network:

  1. Reset the network settings on the printer.
  2. Follow the Wi-Fi setup steps to connect to the new router’s network.
12. What should I do if my printer is not responding to a connection attempt?

Answer: If the printer is not responding:

  1. Ensure the printer is turned on and within range of the Wi-Fi router.
  2. Restart the printer and router.
  3. Try connecting the printer to the network using a different method (Wi-Fi Setup Wizard, WPS, etc.).
  4. Check for any firmware updates for the printer.
13. How do I disable MAC address filtering on my router for my Epson ET-2720?

Answer: To disable MAC address filtering:

  1. Access your router’s settings through a web browser.
  2. Navigate to the security or MAC address filtering section.
  3. Disable MAC address filtering or add your printer’s MAC address to the allowed list.
14. Who should I contact if my Epson ET-2720 still won't connect to Wi-Fi?

Answer: If you have tried all troubleshooting steps and your printer still won’t connect:

  1. Visit the Epson support website for additional resources.
  2. Contact Epson customer support for further assistance.
  3. Provide details about your issue and the steps you’ve already taken to resolve it.

How did we do?

Call Us: If Your Epson Printer Not Printing | Get In Touch With Us

How to Install Epson Printer on Chromebook | Compelete Guide

Contact